750mm slitting line

1. Equipment Overview
This is a 750mm narrow-width slitting line, manufactured by Foshan Texiang Machinery Co., Ltd., commissioned in 2018, and officially taken offline in June 2026. The most notable highlight of this equipment is its exceptionally short service life—only about 8 years from commissioning to shutdown. In the second-hand metallurgical equipment market, this qualifies as a"near-new"machine, far superior to most comparable second-hand equipment with 15–20 years of service age.

2. Manufacturer Background
Foshan Texiang is a well-known metallurgical equipment manufacturer in South China, with significant market share and technical expertise in narrow-width slitting lines and small-scale cut-to-length lines. Its equipment is renowned for compact design, precision manufacturing, and user-friendly operation, particularly well-suited to the actual production needs of small and medium-sized metal processing enterprises.

3. Slitting Shaft System
The slitting shaft has a diameter of Ø100 mm. Although smaller than the Ø140mm shaft of the previously mentioned 800mm line, this shaft diameter has been thoroughly engineering-validated for the 750mm processing width, providing adequate rigidity and torsional strength for slitting various metal strips within the 0.3–3.0mm thickness range. The shaft is driven by an 18.5 kW motor, with a power configuration that matches the line's width and speed positioning, offering an economical and practical solution.

4. Recoiling System
The recoiler is equipped with a 37 kW drive motor, forming a reasonable front-to-rear power ratio with the 18.5kW slitting motor. The 37kW recoiling power is more than sufficient to ensure stable recoiling at the maximum speed of 200 m/min, guaranteeing the compactness and neatness of finished coils. Although the maximum coil weight is not separately listed, referencing comparable 750mm-class line standards, the recoiling capacity typically falls in the 8–12 ton range, meeting the recoiling requirements of the vast majority of narrow-strip processing scenarios.

5. Speed Performance
The line achieves a maximum operating speed of 200 m/min, matching the speed level of both the previously mentioned 800mm narrow-width line and the 1650mm wide-width line. The 200 m/min line speed represents a standard high-speed configuration in the narrow-width slitting field, ensuring processing efficiency for thin materials while providing ample cutting stability for thicker materials.

6. Equipment Age Advantage — Core Selling Point
The most prominent competitive advantage of this equipment lies in its recent manufacturing year and short service period. Manufactured and commissioned in 2018, and taken offline in June 2026, its actual service life is only about 8 years. By comparison, most slitting lines currently circulating in the second-hand market were manufactured between 2005 and 2010, with typical service ages of 15–20 years. An 8-year service age意味着:

• Lower mechanical wear: Critical components such as main shaft bearings, gearboxes, slitting shafts, and recoilers have consumed far less of their fatigue life compared to older equipment;

• Minimal electrical system aging: Electrical components including motors, drives, control cabinets, and sensors remain in a stable phase of their lifecycle, with low failure rates;

• Better precision retention: Key precision indicators such as shaft roundness, parallelism, and shear clearances remain closer to factory-original specifications;

• Longer remaining service life: Buyers can expect a longer secondary service life, spreading annual depreciation costs more favorably.

7. Shutdown Timing and Equipment Condition
The equipment was just taken offline in June 2026, meaning it is not a long-idle or scrapped machine, but was in normal production operation right up to its shutdown. This holds significant value for second-hand buyers:

• The equipment has a continuous and traceable operating history;

• It was producing qualified products until shutdown, indicating fully functional equipment;

• No"idling diseases"such as rust, seal aging, or lubricant dry-out caused by long-term idling;

• On-site trial runs with actual materials can be arranged before dismantling to verify actual slitting accuracy and operating condition.

8. Application Scenarios and Positioning
The 750mm width falls into the"standard narrow"category among narrow-width slitting lines—slightly narrower than the 800mm line but wider than 500mm-class lines, sitting right in the"golden width"range for small-to-medium规格 strip processing. This equipment is particularly suitable for:

• Tube manufacturing: Narrow strip steel slitting for pipe production;

• Hardware stamping: Precision slitting of narrow coils for stamped parts;

• Electrical components: Narrow strip materials such as motor stator/rotor laminations and transformer silicon steel;

• Door and window accessories: Raw material slitting for small architectural profiles;

• Stainless steel narrow strips: Precision slitting of decorative and tableware-grade stainless steel strips.

9. Scarcity in the Second-Hand Market
In the second-hand metallurgical equipment market, narrow-width slitting lines that are"recently manufactured, short-serviced, and in good condition"are extremely scarce. The vast majority of circulating equipment consists of 10–20 year old machines, where buyers often have to compromise between price and reliability. With its 2018 manufacturing year, this equipment offers a significant generational advantage in the second-hand market—its design philosophy, electrical configuration, and manufacturing processes are markedly superior to early-2000s equipment, while the price remains far below that of equivalent new machines (which typically have 6–12 month delivery lead times and investment costs several times higher).

10. Added Value
As a used metallurgical total solution provider, Keepwin Industry Co., Limited offers not only the main unit but also optional auxiliary equipment such as loading trolleys, uncoilers, hydraulic systems, electrical control systems, and coil unloading devices to form a complete 750mm slitting line. Keepwin provides installation guidance, commissioning services, spare parts supply, and after-sales support. Particularly for this"near-new"machine, Keepwin can coordinate with the original manufacturer (Foshan Texiang) to provide technical support and spare parts access, further reducing the buyer's operational risks.

11. Collaborative Positioning with Other Slitting Lines
Comparing this equipment with the three previously introduced machines:

• 1650mm wide-width line (2013, Jinan Yigao): Suitable for wide coils and high-volume production, complementing narrow-width lines;

• 1350mm cut-to-length line (2014, Foshan Yige): Suitable for fixed-length sheet production, forming upstream/downstream synergy with slitting lines;

• 800mm narrow-width line (2014): Suitable for 0.3–3.0mm narrow strip slitting;

• This 750mm line (2018, Foshan Texiang): The newest manufacturing year, suitable for similar narrow-strip slitting needs, but with a newer and more reliable condition.

If a buyer acquires both the 800mm line and this 750mm line, they can flexibly allocate production based on order demands, or use one as a backup line, significantly improving production scheduling flexibility and risk resistance.

12. Summary
In summary, this 750mm slitting line is a recently manufactured, short-serviced, high-condition, and exceptionally cost-effective second-hand narrow slitting machine. Its 2018 manufacturing year is a"scarce resource"among comparable second-hand equipment, and its 8-year actual service life translates to lower mechanical wear, better precision retention, and a longer remaining service life. For metal processing companies seeking to acquire a"near-new"narrow-width slitting line with a moderate investment, this represents an excellent opportunity not to be missed.